|    |  
Búsqueda:   Búsqueda
Comprar por Marca
Comet
Cushcraft
Daiwa
Hy-Gain
Impex
MFJ
Mirage
Motorola
Steelbras

ATM-65 - TELESCOPIC AL. MAST, 65FT

Hy-Gain | cód: ATM-65

US$ 196,95
Disponibilidad: Pendientes de entrega
En este momento no tienen existencias de este producto. Si desea solicitar este producto que se proporcionarán a su solicitud. Por favor, vea lo tiempo de entrega por e-mail sales@impextechnology.com antes de hacer el pago
Indicar produto
Dúvidas?
Aumentar fonte Diminuir fonte
The ATM-65 is an 11-section multi-purpose aluminum telescopic pole that can be used for vertical antennas or as a mast. Length is 64 feet when fully extended. Only 6 feet long when fully collapsed without clamps. Great for portable or temporary and permanent use---traveling, camping, etc. Includes one size of each of the following slotted tubing:

0.625"OD X 0.035"Wall-th X 0.555"ID

0.750"OD X 0.058"Wall-th X 0.634"ID

 

0.875"OD X 0.058"Wall-th X 0.759"ID

 

1.000"OD X 0.058"Wall-th X 0.884"ID

1.125"OD X 0.058"Wall-th X 1.009"ID

1.250"OD X 0.058"Wall-th X 1.134"ID

1.375"OD X 0.058"Wall-th X 1.259"ID

1.500"OD X 0.058"Wall-th X 1.384"ID

1.625"OD X 0.058"Wall-th X 1.509"ID

1.750"OD X 0.058"Wall-th X 1.634"ID

2.000"OD X 0.120"Wall-th X 1.760"ID

Also includes 10 hose clamps. Guying is required if the overall height is greater than 30ft. Top section is 0.625" OD and bottom section is 2.00"OD. X 0.120" wall thickness.
The ATM-65 is an 11-section multi-purpose aluminum telescopic pole that can be used for vertical antennas or as a mast. Length is 64 feet when fully extended. Only 6 feet long when fully collapsed without clamps. Great for portable or temporary and permanent use---traveling, camping, etc. Includes one size of each of the following slotted tubing:

0.625"OD X 0.035"Wall-th X 0.555"ID

0.750"OD X 0.058"Wall-th X 0.634"ID

 

0.875"OD X 0.058"Wall-th X 0.759"ID

 

1.000"OD X 0.058"Wall-th X 0.884"ID

1.125"OD X 0.058"Wall-th X 1.009"ID

1.250"OD X 0.058"Wall-th X 1.134"ID

1.375"OD X 0.058"Wall-th X 1.259"ID

1.500"OD X 0.058"Wall-th X 1.384"ID

1.625"OD X 0.058"Wall-th X 1.509"ID

1.750"OD X 0.058"Wall-th X 1.634"ID

2.000"OD X 0.120"Wall-th X 1.760"ID

Also includes 10 hose clamps. Guying is required if the overall height is greater than 30ft. Top section is 0.625" OD and bottom section is 2.00"OD. X 0.120" wall thickness.
Institucional
Preguntas y información
Preguntas y información
Centro de atención
Teléfono: (19) 3367-7022 - Ventas, preguntas e información: sales@impextechnology.com
Formas de pago
© 2025 Impex Technology | Soundy USA
| | |